The IoT HUB is an R485 MODBUS RTU LoRaWAN converter which collects data from MODBUS RTU devices and transmits them to LoRaWAN network. Connected MODBUS RTU measuring device module is connected to the converter.
The converter is fully configurable via PC and can set up telegrams that are sent for reading data from external measuring modules after RS485 or UART bus.
Using the user program on the PC, it is possible to set positions and different formats of measured values in the reply telegram from measuring instrument.
The retrieved value can also be edited using linear conversion (offset and scale) to recalculate the units or recalibrate the measured value. If the answer telegram contains multiple measured quantities, they can be processed at once.
The IoT HUB allows connecting several preconfigured sensors like Yokogawa’s SMART SENCOM sensor for pH, differential pH, and conductivity.
The connection is managed through dedicated connector over special cable equipped with one side male and other side female connectors.
These sensors are powered from internal battery by a voltage of 3.6V. This supply voltage is switched on, for the time required to measure and read all measured data.
The sampling interval time is adjustable. It is also possible to set the bootstrap time of the power supply before the actual measurement.
•for indoor and light applications
• Box with IP55 protection and dedicated cable connector
• Antenna cable SMA connector
• Battery powered / 3.6V
• Battery life: 5years/5 min sampling
• Power Sleep/Wake-up management
• Magnetic switch for ON/OFF
• EU LoRaWan radio
• LED communication indication
• High gain antenna option
• for wastewater monitoring in channels and heavy applications
• Cable glands with IP 67 protection for Antenna @ Sensor cable
• Base plate with dedicated connectors for WU11 and SMA high gain ant. cables
• Battery powered / 3.6V
• Battery life: 5years/5 min sampling
• Power Sleep/Wake-up management
• Magnetic switch for ON/OFF
• EU LoRaWan radio
• Transparent cover option
• LED communication indication
The CDS VR950 Industrial Wireless Gateway is a wireless network infrastructure device designed for mission critical, industrial applications in the oil & gas, mining, and manufacturing sectors where safety, security and reliability are a must.
The VR950 is an all-in-one, dual-standard infrastructure device designed to manage ISA100 and Wireless Hart networks simultaneously. It contains all the necessary components for network management and comes with advanced features such as redundancy and network collocation.
• The CDS Wireless TC210-T is an industrial wireless temperature transmitter designed to acquire temperature measurements from type T thermocouples and transmit them wirelessly using either one of the open standards ISA100 Wireless or WirelessHART.
• With an outstanding level of accuracy over a wide temperature range, the TC210-T delivers valuable thermal data for test and validation, process control, and safety applications.